SeppLeaf, the gilder's source
212-683-2840       sales@seppleaf.com    
LoginBasket

Aluminum Leaf Rolls

5 m
5 m
50 m
50 m
75 m
75 m

Aluminum Leaf Rolls, also known as Imitation Silver Ribbon Leaf, are produced by mounting individual sheets of pure aluminum leaf onto a continuous backing paper, creating a seamless roll format for efficient application across large surfaces. This construction delivers a bright, silver-colored metallic finish while allowing for fast, consistent coverage on expansive or linear projects.

Available in 50 meter and 75 meter master rolls, aluminum leaf rolls are ideal for covering large areas such as walls, ceilings, architectural features, and extended trim. The continuous format minimizes seams and significantly improves efficiency compared to traditional leaf books.

Each roll is created by placing 6 1/8" square aluminum leaves onto a continuous length of waxed paper with an approximate 2 mm overlap. When applied, this produces a continuous row of 6" aluminum squares, resulting in a smooth, uniform metallic surface. The aluminum leaf is carefully aligned within the edges of the backing paper, ensuring consistent placement and clean, professional results.

Aluminum ribbon leaf is also available in pre-cut widths and can be easily cut down to custom sizes as needed. When trimmed, both the aluminum leaf and waxed backing paper are cut together, producing a clean, precise edge and allowing for exact sizing in detailed or specialized applications.

Aluminum Leaf Rolls are particularly well suited for:

• Large-scale walls and ceiling applications

• Architectural and decorative paneling

• Long moldings, trim, and borders

• Production environments requiring speed and consistency

• Projects where minimizing seams is essential

Because the leaf is supported by a waxed paper backing, it can be handled directly without the use of a gilder’s tip. During application, the leaf is pressed onto a properly prepared adhesive surface, and the backing is then lifted away to reveal a continuous metallic finish.

Due to the presence of wax residue from the rolling process, water-based topcoats are not recommended, as they may not properly adhere to the gilded surface. Oil-based or solvent-based sealers are generally more suitable and can be applied without special preparation. As aluminum is naturally non-tarnishing, a protective topcoat is not required, though it may be used to enhance durability in high-wear or exterior conditions.

Like all metal leaf, aluminum leaf rolls should be stored in a stable environment, protected from excessive heat, cold, or humidity to maintain proper adhesion between the leaf and backing.

With their continuous format, adaptability in sizing, and efficient application, Aluminum Leaf Rolls provide a dependable and professional solution for achieving a clean, silver-toned metallic finish across large and complex surfaces.


 @ seppleaf.com

Aluminum Roll Leaf, 1" 25mm x 50m

Aluminum Roll Leaf, 1" 25mm x 50m ITL

REF: N5025-A       Roll       Made in Italy


 @ seppleaf.com

Aluminum Roll Leaf, 1" 25mm x 75m

Aluminum Roll Leaf, 1" 25mm x 75M ITL

REF: N7525-A       Roll       Made in Italy








 @ seppleaf.com

Aluminum Roll Leaf, 1/4" 6mm x 50m

Aluminum Roll Leaf, 1/4" 6mm x 50M ITL

REF: N5006-A       Roll       Made in Italy


 @ seppleaf.com

Aluminum Roll Leaf, 2" 51mm x 50m

Aluminum Roll Leaf, 2" 51mm x 50m ITL

REF: N5051-A       Roll       Made in Italy


 @ seppleaf.com

Aluminum Roll Leaf, 2" 51mm x 75m

Aluminum Roll Leaf, 2" 51mm x 75M ITL

REF: N7551-A       Roll       Made in Italy




 @ seppleaf.com

Aluminum Roll Leaf, 3" 76mm x 50m

Aluminum Roll Leaf, 3" 76mm x 50m ITL

REF: N5076-A       1 Roll       Made in Italy


 @ seppleaf.com

Aluminum Roll Leaf, 3" 76mm x 75m

Aluminum Roll Leaf, 3" 76mm x 75M ITL

REF: N7576-A       Roll       Made in Italy